Two questions hide inside “will it look like the photo?” The first is about likeness: the nose, the gap in the teeth, the way he holds his head. The answer there is yes, and it is checked before anything is painted. The second is about colour, and the honest answer is no — a painting will not reproduce your file pixel for pixel. Four shifts happen on purpose between the photograph and the canvas. Knowing what they are is the difference between a commission that delights you and one you spend a year resenting.

Likeness and colour are two different jobs

Likeness is structural: the distance between the eyes, the width of the jaw, the direction the light comes from. It is decided in the composition stage, on a digital mock-up you approve within 24 hours of sending photographs. If the mock-up is not the right person, you say so then and nothing is painted.

Colour is a translation, and translations are never word-for-word. A photograph is a measurement of light hitting a sensor. A painting is pigment under a varnish, seen by an eye in a room. Between those two objects sit decisions — some technical, some artistic — that move colour by measurable amounts. What follows is an honest account of each one.

Your photograph has already made the colour decisions

Before the file reaches a painter, three things have happened to it that nobody asked for:

  • Automatic white balance. A phone measures the scene and picks a colour temperature, usually somewhere between 3,200 K (tungsten) and 6,500 K (overcast daylight). The same face shot in a kitchen at night and beside a window in the morning will come back with visibly different skin — one ruddy, one pale blue — because the camera corrected for lighting you were not consciously aware of.
  • Saturation and contrast boost. Phone processing typically pushes saturation by 10–25% and adds an S-curve to contrast, because punchy images get shared. Grass is greener than grass. A navy sweater becomes cobalt.
  • HDR merging. Night mode and HDR stack several exposures, so the shadow side of a face shows detail that was not visible to you when you took the picture. That is useful for the painter, but it means the file is not what the scene looked like either.

Then messaging apps compress it. A photo sent through chat loses roughly 60–80% of its data and can shift colour slightly in the process. Send the original file — email attachment, cloud folder, or a direct upload — not a screenshot of it. Our guide to choosing reference photographs covers resolution, lighting and which shots to include; this article is about what happens to the colour afterwards.

The four shifts, and how far each one goes

Every competent portrait painter makes these adjustments. A painter who skips all four produces something that reads as a photo enlargement with brush marks — flat, slightly plastic, and oddly cold on a wall.

ShiftWhy it happensTypical amountAdjustable on request?
Values compressedPaint cannot be as bright as a screen’s white, and never goes fully black under varnishAbout half a stop at each endYes, partly
Chroma pulled backPhotographic saturation looks fluorescent under 2,700 K room light10–20% less saturationYes
Skin warmedPigment plus varnish reads warmer than an sRGB file; warmth keeps flesh alive indoorsA half-step toward red-yellowYes
Edges softenedA brush is 1/8–1/4 in wide; a lens resolves a hairDetail hierarchy, not uniform sharpnessYes, within reason

Values first, because they matter most. Squint at a portrait and the colour disappears; what is left is the pattern of light and dark, and that pattern is what your brain uses to recognise a face across a room. Photographs routinely hold a 10-stop range that paint cannot. A painter compresses the darkest shadows up and the brightest highlights down by roughly half a stop each, then rebuilds the shape with edges and temperature instead of raw contrast. The result reads as more solid, not less accurate.

Chroma next. Cutting saturation by 10–20% sounds like a loss. In practice it is what stops a red dress from vibrating against a cream wall at nine in the evening. Photographic colour is tuned for a backlit screen in a dark room; painted colour has to survive a lamp.

A portrait is not a copy of a photograph. It is a second reading of the same person, made in a slower medium — and the differences are where the painting earns its place on the wall.

Skin is never one colour

Sample a cheek in any photograph and you get a single value, something like #C89A7B. Painters do not work that way. A face is mixed as six to ten separate piles: forehead slightly cooler than the cheek, nose warmer at the tip, ear redder than anything else on the head, jaw and neck a half-step greener because they sit in the shadow of the chin, and the shadow itself a grey-violet or olive rather than black.

This is the single biggest visible difference between an amateur copy and a painted portrait, and it is also the reason a painting can look more like someone than their photograph does. Black in a shadow flattens a face into a mask. A grey-green shadow keeps the blood underneath it.

Varnish adds warmth, and it keeps changing for a few months

Every canvas we ship is varnished with an archival gloss before it leaves the studio. Varnish does two things to colour: it deepens the darks — which is why unvarnished paintings look chalky — and it adds roughly 3–8% warmth. Over the first three to six months it settles and clears slightly as the last solvents leave.

So judge colour in daylight, in the first week, not at eleven at night under a warm bulb. If a painting looks a shade too golden on arrival, put it near a north-facing window for half an hour before you decide. Natural resins yellow permanently over decades; the synthetic varnish we use does not, which is also why cleaning advice in our oil painting care guide is mostly about light and dust rather than solvents.

Your room decides what you actually see

Two people can look at the same canvas and disagree about its colour, and both be right. Light source is the variable nobody accounts for.

LightColour temperature / CRIWhat it does to skin
North window, indirect daylight5,000–6,500 K, CRI 95+Truest reading; judge here first
Warm LED (most living rooms)2,700 K, CRI 80–90Adds yellow; reds strengthen, blues dull
Halogen / incandescent3,000 K, CRI 100Very warm; flatters skin, exaggerates warmth
Cool fluorescent or office LED4,000 K, CRI 70–80Green-cyan cast; complexions look tired

Practical arithmetic: hang the painting where you will look at it most, then check it there at the time of day you actually use the room. If the wall is lit by two 2,700 K lamps, expect the canvas to read warmer than the mock-up you approved on a calibrated screen — that is the room, not the painting. A picture light at 3,000 K and CRI 90+ placed 24 in or more from the surface will give you the evening version of daylight without hotspots.

Screens lie as well

An uncalibrated laptop can be 15% off in saturation. A phone in bright ambient light raises its own brightness and washes out shadow detail; the same phone at night looks oversaturated. Wide-gamut displays (P3) show sRGB files more vividly than the painter intended. So when you approve the mock-up, open it on two devices — a phone and a computer — and look at it in daylight. If the two disagree badly, trust the one that looks duller. Paint is closer to the dull one.

If it still looks wrong when it arrives

Sometimes the issue is genuine, and worth naming precisely, because only some of it can be fixed without repainting:

  • Fixable in one free adjustment round: overall warmth, background tone, a shadow reading too heavy, a highlight too bright, edges that feel too crisp or too soft. These are glazes and scumbles over a dry surface — days, not weeks.
  • Not fixable by adjustment: the face is not the person, the pose is wrong, the crop cut something that mattered. That is a repaint, and we treat it as our error, not yours. Our process for what happens if you don’t like your portrait sets out the boundaries honestly.

One number worth knowing before you order: at 16 × 20 in, a face is roughly 3 in tall. At that scale a shift of a single value step is visible from a metre away. It is also the reason small canvases tolerate colour liberties better than large ones — the bigger the face, the more precisely the colour has to be argued.

How to brief for the colour you want

You do not need technical vocabulary. Five sentences in your first message will do more than any amount of back-and-forth later:

  1. Name the reference of record. “The second photo is the one that looks like him; the first is only for the shirt.”
  2. Say how literal you want the colour. “Match the photo as closely as you can” and “warm it up, it’s for a hallway with lamplight” produce different paintings.
  3. Describe the wall. Colour, and which direction the light comes from. A sage-green wall changes how a warm skin tone reads.
  4. Flag anything the camera invented. Shine on a forehead, a red nose from the cold, a sunburn, a filter you used.
  5. Send the original files, unedited, with the light you remember: “late afternoon, window on the left.”

That is the whole brief. From there the studio builds the composition, sends the mock-up, and only paints once you have approved it — the sequence is laid out step by step in what happens between your photograph and the canvas. Published prices start at $189 for 8 × 10 in and $389 for the 16 × 20 in most people choose, and the custom portrait page lists every size and subject count without a quote form in the way.

Likeness is the promise. Colour is a translation, made by a person, for a room you live in. Ask for a literal copy and you will get a flat photograph in paint; say what the room needs and you get something better than the file ever was. If you want to talk through a specific photograph before committing, send it for a quote — we will tell you what will translate and what will not.